Bottle Typing
(Typology) |
Main Subject Pages |
Home |
Dating |
Typing/Shapes ▪Liquor/Spirits ▪Wine ▪Beer ▪Soda/Mineral ▪Medicinal ▪Food ▪Household ▪Misc./Foreign ▪Labeled bottles CATALOGS ▪1906 IGCo. ▪1916 KGBCo. ▪1920 IGCo. ▪1926 IGCo. ▪1933 OIGCo. |
Glassmaking ▪Makers Marks |
Colors |
Finishes & Closures |
Body & Seams |
Bases |
Fragment ID |
Glossary |
References |
Links |
FAQ's |
About this site |
Website Map |
HOME: Bottle Typing/Diagnostic Shapes
Click here to move directly to this pages
"Organization & Structure"
summary.
INTRODUCTION
The shape of an historic bottle is usually indicative of what the bottle was most likely used for, i.e., what it contained. What a bottle was used for is referred to on this website as a "bottle type" or "type of bottle", i.e., liquor, mineral water, druggist, food, etc. The process of ascertaining what a bottle was used for is termed typology or simply "typing" and is the subject of this webpage and the many connected sub-pages. Since it was the contents of a bottle that guided the consumer in making a selection, not the bottle itself, contents are the most important consideration in establishing categories for bottle classification (Herskovitz 1978). The following is from Reher & Wedel (1990):
Glass containers are engineered along very specific design principles. Container size, orifice diameter, neck length, and other attributes as well as the rations between such morphological characteristics are determined largely by such basic principles as frequency of access, amount of contents removed with each access, and the type of content (bulk solid, liquid, semi-liquid, etc.).
Most bottle shapes were closely associated and identified with a certain product or products as "form follows function" to a large degree in bottle shapes and styles. Soda/mineral water and beer are prime examples of products very closely identified with certain distinct bottle shapes that were rarely used for other products. However, there were many exceptions and different "standard" bottle styles have varying degrees of fidelity to type with some shapes less connected to a specific product than soda and beer bottles. For example during the 19th and early 20th centuries small (one pint or less), flat liquor flasks were also used to contain medicine (often including alcohol however), Jamaica ginger (also high alcohol), vanilla extract, and other liquid products, though 90%+ of these flasks were likely used for liquor (empirical observation/estimate).
Of course, there will always be a few wild exceptions that leave one scratching their head as to why that shape was used for that product. For example, the early 1890's amber bottle pictured to the right is embossed Aromatic / Disinfector / Pat. / Sept. 9, 1890 (which research on the internet indicates was a company located in at least Philadelphia and New York) and is very similar in shape and size to a round bottom soda bottle, but in fact, held a poisonous disinfectant! The embossing is also upside down relative to the bottle base because the bottle was inserted upside down into to a metal dispenser for use (Rochester Midland Co. 2005). Oddities like this abound in the historic bottle world and one just needs to be aware that there are always exceptions to any general statement or "rule" with the dating and typing of bottles.
Berge (1980:37) notes the following in his milestone BLM historic cultural resources report entitled "Simpson Springs Station - Historical Archaeology in Western Utah":
"A drawback of functional classifications is that many unlabeled or unmarked bottles are assumed to have been used for one purpose when in reality they may have been used for something quite different. A small, square bottle could have been used for shoe polish, oil, pills, dental powder, or a number of other purposes. Classifying a shoe-polish bottle several times as a pill bottle would obviously lead one to erroneous conclusions about the users. It is not suggested that functional interpretations be eliminated; rather they may play a part in description as possible uses, and in site interpretations. The functions of many bottles with traditional shapes are well known."
Berge also noted that "...analysis of remnants of the contents left in the bottle may lead to precise identification; however, this would give the last use only, and bottles are often used for secondary purposes..." and "...possibly the only positive method of identifying primary content is by the original label."
As indicated above, there are no guarantees in regards to typing
otherwise unmarked or unlabeled bottles, but as Berge noted "...the
functions of many bottles with traditional shapes are well known."
Similar to the manufacturing related dating features discussed elsewhere on
this site, typing is based on the relative probability of determining what
the bottle was used for, i.e., the probability that the determined use is
correct. Though the relative probabilities noted here are not and can
not be specifically - or statistically - quantified, the relative
probability predictions are based on the information gleaned from hundreds
of references and bottle maker catalogs as well as the authors
observations over many decades. Critical to predicting the likelihood
of a certain bottle shape being closely associated with a particular type of
contents are bottles with the original labels still intact and embossed
bottles, where the original contents are obvious.
A
note about embossing:
What
a bottle was used for (what "type" of bottle it was) can often be easily
ascertained if there is embossing on the bottle. As an example,
if one considers the tall, amber cylinder bottle pictured to the left which is embossed
Teakettle (teakettle trade mark) / Old Bourbon / Shea,
Bocqueraz & McKee / Agents / San Francisco a person already knows its a liquor bottle from California,
because it says so. It could well have been reused for other products,
but one can be sure that it was originally used for a proprietary brand of
bourbon.
But from when does this bottle date? That is the other primary question most people have about a given bottle besides what it was used for. If this bottle is run through the questions on the Bottle Dating pages, one is able to narrow the manufacturing date of this bottle to between the mid-1860's and early 1880's based on key manufacturing based diagnostic features, i.e., lack of a pontil scar (Question #4), applied finish (Question #5 ), lack of mold air venting (Question #7), and a post-mold base type (Question #6).
This "Bottle Typing/Diagnostic Shapes" series of pages would also help a user narrow down the date range of this commonly shaped Western liquor bottle to between the mid 1870's and early 1880's. Additionally, the Reference Sources page lists several excellent reference books on Western American liquor bottles which would help flesh out out the story of the Teakettle Old Bourbon bottle and confirm the date range of this bottle as that listed above (Wilson & Wilson 1968; Thomas 1977 & 2002). The point here is that the dual process of both dating a bottle and determining what it was used for (typing) provides mutually complementary information in that the typing often gives clues about the age and the manufacturing related diagnostic features can sometimes provide clues about the bottle type. Consulting other website pages (e.g., "Bottle Bases", "Bottle Body Characteristics & Molds Seams", "Bottle Finishes", etc.) also helps round out the general "story" of a given bottle.
Back
to bottle bottle body embossing....
Unfortunately, embossing was not generally common on
utilitarian bottles until after the Civil War, and even
by the 1890's, embossed bottles
still probably remained less than 40% of total production though the
percentage varied significantly by bottle type (Fike 1987; Fowler pers. comm. 2006). To
quote McKearin & Wilson (1978:89) in reference to mid-19th century bottle
production - "For the most part, the output of one (bottle maker)
was similar to that of another - unmarked and anonymous."
Given this, it is certainly true that the majority of bottles produced during the period covered by this website
(1800 to the 1950's) are either
not embossed, or if embossing, it does not provide any information as to the
date and/or use (type) of the bottle. Conversely, users will note that a lot of the bottles pictured
on this website will have embossing because an embossed bottle provides the
potential for additional information about
a particular bottle style or shape which is directly applicable to its non-embossed - but similarly shaped
- counterpart.
For example, one would expect an unembossed bottle of the same shape as the Teakettle sharing similar manufacturing related diagnostic features (applied finish, no air venting, post-mold base) to likely be a liquor bottle that dates from the 1870's or early 1880's. The unembossed cylinder "fifth" liquor bottle pictured to the right has virtually all the same diagnostic features of the Teakettle except that it was blown in a four-piece instead of a two-piece mold ( a feature which does not affect the estimated dating range - see the mold type discussions on the Bottle Body Characteristics & Mold Seams page). Because it has the same shape and shares the same primary manufacturing characteristics, it is reasonable to conclude that this bottle almost certainly dates from the same era as the Teakettle, i.e., approximately 1875 to 1885 and held some type of spirits.
In summary, form follows
function most of the time and is the best one can do
from this juncture in time unless the unembossed bottle in question has the original
label. Even then, as Berge (1980) noted above, this only tells one what the
last use of the bottle was, if indeed the bottle was reused.
NOTE: Attached to this complex of pages is one that is an ongoing pictorial coverage of all types of bottles with their original labels. This page allows users to see specifically what many different shapes of bottles were used for as the original labels are still intact. Click Labeled bottles to move to that section of this page. |
Click here to move straight to the "Bottle Typing/Diagnostic Shapes" section below.
For the first time user of this site it is recommended that
the
following information be read prior to moving to the Bottle Typing section.
First this cautionary note: Like bottle dating, bottle "typing" (typology) is not a precise science. Depending solely on the shape of a bottle to conclude what its contents originally were is not absolute, but the best one can often do. There are a couple primary reasons for this: 1. The same type or style of bottle may have been used for distinctly different products. Numerous examples abound of this phenomena - A soda style used for patent medicine, a "fifth" whiskey shape used for bitters or tonic, a liquor flask shape used for Jamaica ginger (medicine), a milk bottle used for maple syrup (image to the right from eBay©), and so forth. It was entirely the decision and sometimes whim of the purchaser/user (filler) of the bottle as to what went into it. As noted by Berge (1980), "Although (bottle) manufacturers had specific names and uses in mind for their bottles, the purchaser may have actually used them for something quite different." However, consumers of the time - just like today - looked for certain products in certain shaped packages. Because of this most users of bottles used some accepted or standard shape for a given product. A square, short necked bottle like that pictured below was very commonly used for medicinal products and in particular "bitters" which was a very popular type of usually high alcohol medicinal product during the 19th and early 20th centuries. This general shape was also used for "schnapps" - another high alcohol nominally medicinal product. In fact, early bottle makers called this shape either a "bitters" or a "schnapps" (Illinois Glass Co. 1903-04, Alther 1909). If the bottle is embossed (or labeled) with the product name or type, then one knows for sure what it originally contained. If the bottle is not embossed or labeled, then the shape can still be very indicative of what the contents most likely were. 2. Any given bottle could have been recycled and reused many times for totally unrelated products. As an example, the bottle pictured to the left obviously began its life as a bitters container for Lashes Bitters. This product originated in Sacramento, CA. though in the 20th century its popularity justified offices in Chicago and New York (Wichmann 1999). However, as indicated by the label on the reverse, this particular bottle finished its useful life as an ammonia container - a decidedly poisonous substance - from a Cleveland, OH. concern. Click label close-up to view more label details. Medicinal and bitters bottles were commonly reused for bluing and ammonia (Busch 1987). This machine-made bottle dates from between the mid 1910's and mid 1920's; when it was used for ammonia is unknown, but likely the during the same era.
Another very early example of how a given type of bottle can be used or re-used for a non-type typical product, click on the following links: sunburst with label; close-up of the label. This shows an example of an 1820s or 1830s era "sunburst" flask that was almost certainly re-used for "SPTS. CAMPHOR" by a Pennsylvanian druggist. Spirits of camphor was used internally (an expectorant) and still is used externally (muscle aches and pains) though it is now considered to be a more or less hazardous substance if ingested; it is definitely not considered a liquor! Even on a non-commercial level, bottles were very often reused. Below is an image of an early 20th century family picnicking with the children using three reused liquor bottles and one reused medicine bottle (likely a Moxie Nerve Food bottle) as containers for milk and other presumably softer beverages; click to enlarge. (Picture courtesy of Dan Herzog.) This certainly shows that bottle recycling was not just a modern phenomena, as it was widely practiced in throughout the 19th (and before) through early 20th centuries when bottles were relatively more expensive to produce than today. According to the Wilson's book Spirits Bottles of the Old West, an amber 1/5 gallon (i.e., "fifth" size) whiskey bottle - like the Tea Kettle Old Bourbon bottle pictured earlier on this page - cost an expensive 25 to 30 cents each to produce in the 1870's (Wilson & Wilson 1968). That would be equivalent to at least $4.00 today (USGPO 1975). Bottle re-use was common since the container itself was often more expensive to produce than the contents. (Note: Probably the best overview on the subject of bottle reuse is found in Jane Busch's article "Second Time Around: A Look at Bottle Reuse" (Busch 1987). This article is now available as a pdf file via the Society for Historical Archaeology website by doing a search at this URL: http://www.sha.org/publications/publicationsOnline/pubExplorer.cfm Regardless of the above points, there is still a high correlation between the shape of a bottle and the primary and/or original use of the bottle. These Bottle Typing pages (and website in general) deal with the fact that a given shape (or manufacturing related attribute) was dominant during a certain period of time and/or for a certain product. This information is also premised on that fact that the probability is high - but not absolute - that any given bottle with a similar shape was likely used for the same type of product. For example an unembossed tall, amber glass, cylinder bottle similar to the Tea Kettle Old Bourbon bottle pictured above is highly likely to have also been used for some type of noncarbonated alcoholic beverage.
Summary Note: The more datable diagnostic characteristics
that can be used in conjunction with the bottle typing information found on
these Bottle Typing pages, the closer the probable date range for an item
can be narrowed and the more confidence one can have with that estimate. |
Note on Base Profiles/Cross-section shapes: One bottle shape related feature which is not broadly addressed on this website is the base profile or shape. This is typically the shape of the bottle base when viewed straight on. It is also usually the cross-section shape of the bottle body, though there are exceptions to the latter, e.g., "mug-based" soda bottles have an octagonal base but a round body cross-section shape. (Click Mt. Hood Soda Water to see an example of a mug-based Hutchinson soda bottle from Portland, OR.) Base profiles and/or the body cross-section shape are a distinct feature of a bottle that has utility when describing a bottle and is addressed here on a bottle specific basis. Base profiles are not addressed broadly because there is little specific dating or typing information to be gleaned from simply knowing the base profile, though the profile can assist at times with the typing of a bottle on a case-by-case basis.
The best readily available source for classifying bottle base profiles is the "Bottle Base Profiles" webpage illustration that was included in the IMACS (Intermountain Antiquities Computer System) guide. A copy of that illustration is available at the following link: http://www.sha.org/bottle/pdffiles/IMACSbaseprofiles/pdf U. of U. 1992). This illustration was from Fikes' 1987 book on historic medicine bottles - The Bottle Book: A Guide to Historic Medicine Bottles. A combination of the IMACS and intuitive shape names are used when describing base profiles on this "Bottle Typing/Diagnostic Shapes" page, the connected sub-pages, and on other site pages.
BOTTLE TYPING/DIAGNOSTIC SHAPES
Bottle typing is not particularly conducive to the use of a questions based "key" like was used on the Bottle Dating pages. A key to identify bottle types based on different physical characteristics would be either impossible to effectively create due to the incredible diversity of bottle shapes, or if created, too ponderous to use.
Instead, this page and the attached sub-pages are structured so that a user can peruse a large assortment of pictures of different bottles to find the shape/type they are interested in. The major bottle type categories used here are based on an amalgam of dozens of references, most notably including Munsey (1970), Ketchum (1975), Herskovitz (1978), McKearin & Wilson (1978), Berge (1980), Fike (1987), Jones & Sullivan (1989), numerous glass makers catalogs, and the IMACS Users Guide (Univ. of Utah 1992) but does not align precisely with any one of these references. Scores of other references were also consulted for the preparation of these pages and are noted where appropriate.
Some users of this site will inevitably disagree with what bottle types were included - or not included - in the broad categories used. For instance some authors place cosmetic bottles (including perfume and cologne) into the "Medical and Chemical" bottle category whereas this website places them within the "Household bottles (non-food)" category (IMACS Univ. of Utah 1992). Others place canning/fruit jars and milk bottles into the "Household Bottles" and "Non-alcoholic Beverages" categories, respectively, whereas this website includes both in a category entitled "Food Bottles & Canning Jars" which is intended to cover bottles and jars which contained non-alcoholic food products (Berge 1980). The point behind these typology pages is not to establish a hierarchal classification system for bottle types but instead to help users identify what the most likely function or use was made of the specific bottle shape or type they are interested in determining such for.
In essence, this Bottle Typing/Diagnostic Shapes complex of webpages is an on-line "type collection" of the major types and styles of bottles made during the period from the 19th through mid-20th centuries.
"Bottle Typing/Diagnostic
Shapes" Related Pages - IMPORTANT: Please read the information in this box. Eight broad categories of bottle types - plus one additional page for images of labeled examples of all types not otherwise pictured - are addressed and given short overviews on this page in the order listed below (no significance to the order):
If a user does not know what type of bottle he or she has, or simply wants to browse, one may scroll through the page below and do a visual search for the bottle type/shape for which they have interest or a need to obtain information.
Each of the eight bottle type categories are described in general in the boxes (with the same background color as this box) listed below. Following a general discussion relative to that category are dozens of thumbnail pictures of different bottle shapes and types within that category. All eight categories have immense variation in potential shapes and overlap with other categories. Because of this, there is no other practical way to approach the subject without using a lot of images and old glass company catalog illustrations. Each thumbnail image may be clicked on to view a larger version of that image. Once an individual finds a specific bottle or type category of interest, they may click on the link at the end of each section below to move to the bottle type specific webpage that expands upon the brief discussions here. These webpages also include detailed bottle type specific information and dating tips that help describe and reinforce the process one must go through to date (or otherwise describe) the subject bottle(s). Each bottle type page contains and has links to a plethora of images of bottles within that category, including the bottles pictured in thumbnail images on this page. Each of these bottle type specific webpages also attempts to sample the breadth of different bottles possible within that particular category for the period covered by this website, i.e., early 1800's through the 1950's. The information found on these pages is
based on scores of different references in hand with the experience and
observations made by the author over the past 4+ decades. As with virtually everything
related to historic bottles, there are periodic exceptions to be found with virtually
all the estimated dating ranges and other information noted for all the
bottle types. These exceptions are noted where possible and useful.
Regardless of the ever present exceptions, the information found should be
reliable for a large majority of bottles within each bottle type and
subtype.
This is all a formidable task indeed and one that can
not ever be totally complete given the diversity of bottles during the
covered era. However, it's a start so lets get
started... |
NOTE:
Also attached to this grouping of pages are complete scanned copies (jpegs) of
several never before re-printed bottle makers illustrated catalogs. Click
on the following links to access these catalogs:
1906
Illinois Glass Co. bottle catalog
1916-1917 Kearns-Gorsuch Bottle Co. catalog
1920 Illinois Glass Co. bottle catalog
1926 Illinois Glass Co. bottle catalog
1933 Owens-Illinois Glass Company bottle catalog
Liquor of all types - bourbon, rye, gin, scotch whisky, brandy, etc. - was bottled in a wide variety of bottle shapes and sizes ranging from small flasks that held a few ounces to demijohns and carboys that held gallons. As with many of the bottle type categories to follow, liquor bottle diversity is staggering in depth and variety. The image to the left shows a grouping of liquor bottles that were manufactured over a one hundred year period (1820-1920), though just a tiny bit of the variety produced during that time span. Still, there are definitive trends in shapes that mark a bottle as very likely to have been used primarily or originally as a container for high alcohol spirits intended for internal consumption during a specific time range of popularity. Alcohol was an important ingredient in many other products also, ranging from of course wine, champagne, beer, ale and porter (all covered in the next two sections) to most patent and proprietary medicines, bitters, and tonics to even preserved ("brandied") fruits. However, this section of the "Bottle Typing/Diagnostic Shapes" complex of pages just covers liquor bottles where the contained product was high in alcohol (20%+) and the intended use was not primarily medicinal - or at least the acknowledged medicinal utility was of secondary importance. Liquor/spirits bottles were, as noted, bottled in a very wide array of different types or styles of bottles. Today some of the basic general shapes that originated in the 19th century are still in use, e.g., the "Dandy" flask and cylinder "fifth", though of course produced with modern machines and (usually) utilizing more modern closures. Many or most other liquor bottle styles are not used today. Because of the immense diversity of shapes used over time, the Liquor/Spirits Bottle typing webpage (linked below) is quite large. As with all historic bottle types and shapes, there is a wide variation of subtle differences to be found within the various diagnostic shape classes which are covered in this section; thus, don't dwell to closely on minor nuances. From this point a user needs to either scan the thumbnail images below to find the liquor bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Liquor/Spirits Bottles to move to that page which specifically covers the various types of liquor bottles commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the following general, and somewhat arbitrary, shapes of liquor bottles which may be clicked on to move directly to that section of the page. (These are further divided on the Liquor/Spirits Bottles page.):
The following thumbnail images of different liquor or spirits bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A very large but separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Liquor/Spirits Bottles. As noted earlier, be aware that the diversity of shape, size, and color of liquor/spirits bottles is as extensive as any class of bottles and those pictured below are but a sampling of that variety, though does represent commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Liquor/Spirits Bottles page are covered in the order that the bottles are pictured below. Click to move to
the
Bottle Typing/Diagnostic Shapes: Liquor/Spirits Bottles
page. |
Return to the top of this page.
Generally speaking, wine and champagne (essentially carbonated or "sparkling" wine) were bottled in a much more limited array of bottle shapes than the spirits/liquor containers discussed above. In fact, it is one of the least diverse of the broad categories covered on this website. First off, virtually all wine/champagne bottles are round in cross section; square, rectangular, or other body shapes are unusual, though they do exist to some extent with wine bottles. Champagne, being carbonated, pretty much had to be contained in round heavy glass bottles (like all carbonated beverages) since round bottles are inherently stronger than other shapes, all other things being equal (e.g., glass thickness, quality). In addition, a large majority of wine and champagne bottles were (and continue to be) produced in some shade of olive green, olive amber, and sometimes aqua/colorless glass; other colors are unusual but possible (McKearin & Wilson 1978, Van den Bossche 2001). The grouping pictured here shows some diversity to be sure but does span a time period from about 1750 to the early 20th century. Wine and champagne bottles today follow closely many of the same basic designs - including closures (i.e., cork) - that were used in the mid-19th century; shapes which were relatively limited in variety. Because of this fact, the wine/champagne typing webpage is relatively brief. As with all historic bottle types and shapes, there is a wide variation of subtle differences to be found within the various diagnostic shape classes which are covered in this section; thus, don't dwell to closely on minor nuances. From this point a user needs to either scan the thumbnail images below to find the wine/champagne bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Wine & Champagne Bottles to move to that page which specifically covers the various types of wine and champagne bottles commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the following two major categories of bottles based on their specific contents which may be clicked on to move directly to those sections. (These are further divided on the Wine & Champagne Bottles page.): The following thumbnail images of different wine and champagne bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Wine & Champagne Bottles. As with most of the bottle types covered here, be aware that the diversity of shape, size, and color of wine and champagne bottles is more extensive than those pictured below, which hopefully represent the most commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Wine & Champagne Bottles page are covered in the order that the bottles are pictured below.
Click to move to
the
Bottle Typing/Diagnostic Shapes: Wine & Champagne Bottles
page. |
Return to the top of this page.
Similar to wine and champagne bottles, beer and related products (ale, porter, stout) were bottled in a relatively limited array of bottle shapes, though probably somewhat more diverse. The grouping to the left - dating from the 1860s to 1950s - shows some of the moderate diversity found in this category. One common feature is that essentially all beer/ale bottles are round in cross section; square, rectangular, or other body shapes are almost unknown. Beer and ale, being carbonated, pretty much had to be contained in round heavy glass bottles since round bottles are inherently stronger than other shapes - all other things being equal (e.g., glass thickness and quality). There were some notable exceptions which are discussed on the Beer & Ale Bottles typing page (linked below). Beer bottles today follow some of the same designs that were used during the late 19th century, though the finish and closures are often different than that era but very similar to those common during the first third of the 20th century (crown cap, external screw threads). Because of this relative uniformity over time, the beer/ale typing webpage is moderate in length. It does cover more information than the previously discussed wine/champagne bottle page; there is just more to say (and been said) about beer bottles and a category probably more commonly encountered on American historic sites than wine/champagne bottles (though the latter category is still quite common). As with all historic bottle types and shapes, there is a wide variation of subtle differences to be found within the various diagnostic shape classes which are covered in this section; thus, don't dwell to closely on minor nuances. From this point a user needs to either scan the thumbnail images below to find the beer/ale bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Beer & Ale Bottles to move to that page which specifically covers the various types of beer and ale bottles commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the major form classes or categories of beer and ale bottles as follows which may be clicked on to move directly to those sections of the page. (These are further divided on the Beer & Ale Bottles page.):
The following thumbnail images of different beer and ale bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Beer & Ale Bottles. As with most of the bottle types covered here, be aware that the diversity of shape, size, and color of beer and ale bottles is more extensive than those pictured below, which hopefully represent the most commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Beer & Ale Bottles page are covered in the order that the bottles are pictured below. Click
to move to the
Bottle Typing/Diagnostic Shapes:
Beer & Ale Bottles page. |
Return to the top of this page.
Soda and mineral water (often lumped together and referred to as "soda water" unless a distinction is necessary) was bottled in a moderately diverse array of bottle styles as indicated by the grouping pictured to the left - a grouping that dates from the 1850s to 1950s. However, like with the beer/ale bottles covered above, the (usually) carbonated nature of soda water narrowed the possible bottle variety in several ways. The bottles had to be made of relatively heavy/thick glass in order to withstand the rigors of repeated bottling and handling - re-use being the norm until well into the 20th century - as well as the gaseous pressures of the product itself. Being carbonated, soda water pretty much had to be contained in round bottles since round bottles are inherently stronger than other shapes - all other things being equal (e.g., glass thickness and quality). Like with beer/ale bottles, there were a few notable exceptions to the round shape which are discussed on the Soda & Mineral Water Bottles typing page (linked below). Unlike some of the liquor, beer and wine/champagne bottles covered above, none of the soda water styles covered still see much widespread use in the U.S. where soda is primarily sold in plastic (though still round) bottles. Worldwide, however, a few of the more modern styles discussed are still being used. From this point a user needs to either scan the thumbnail images below to find the soda/mineral water bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Soda & Mineral Water Bottles to move to that page which specifically covers the various types of soda and mineral water bottles commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the major form classes or categories of soda and mineral water bottles as follows which may be clicked on to move directly to that section of the page. (These are divided further on the Soda & Mineral Water Bottles page.):
The following thumbnail images of different soda/mineral water bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Soda & Mineral Water Bottles. As with most of the bottle types covered here, be aware that the diversity of shape, size, and color of soda & mineral water bottles is more extensive than those pictured below, which hopefully represent the most commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Soda & Mineral Water Bottles page are covered in the order that the bottles are pictured below. Click
to move to the
Bottle Typing/Diagnostic Shapes: Soda & Mineral Water Bottles page. |
Return to the top of this page.
Medicinal/Chemical/Druggist bottles The category of medicinal (and related) bottles is probably the largest and most diverse group produced during the era covered by this website (19th through mid 20th centuries) and in particular, between the 1850s and 1920s. The grouping pictured to the left - which covers a period from the 1850s to 1930s - shows but a tiny sampling of medicinal bottle diversity which is frankly staggering in depth and variety with virtually any shape imaginable used at some point. In fact, many types of bottles that are usually strongly identified with other distinct bottle types (e.g., blob top sodas, liquor flasks, even beer bottles) were used (or re-used) by someone at some time for medicines. Though intimidating in its immense diversity (and for the author of this website!), there are some useful trends in shapes that mark a bottle as very likely to have been used primarily or originally as a container for a some type of medicinal product. Very few of the basic medicinal bottle shapes from the past see any use today as most medicinal products and prescriptions are "bottled" in plastic containers of all sorts, utilizing modern closures. Because of the immense diversity of shapes used in the past, the Medicinal/Chemical/Druggist Bottle typing webpage (linked below) is quite large. As with all historic bottle types and shapes, there is a wide variation of subtle differences to be found within the various diagnostic shape classes which are covered in this section; thus, don't dwell to closely on minor nuances. From this point a user needs to either scan the thumbnail images below to find the medicinal/chemical/druggist bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Medicinal/Chemical/Druggist Bottles to move to that page which specifically covers the various types of medicinal, chemical, and druggist bottles commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the major form classes or categories of these bottles as follows (these are divided further on the Medicinal/Chemical/Druggist Bottles page):
The following thumbnail images of different medicinal/chemical/druggist bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Medicinal/Chemical/Druggist Bottles. As noted earlier, be aware that the diversity of shape, size, and color of medicinal bottles is probably more extensive than any other class of bottles and those pictured below are but a sampling of that variety, though does represent commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Medicinal/Chemical/Druggist Bottles page are covered in the order that the bottles are pictured below. Click
to move to the
Bottle Typing/Diagnostic Shapes:
Medicinal/Chemical/Druggist Bottles page. |
Return to the top of this page.
The category of food bottles - including fruit/canning jars - is another immense group of bottles and jars with a very high degree of diversity of shapes and sizes. As with most of the previous categories discussed above, the examples pictured and described in this section are but a superficial sampling of the variety that was produced during the era covered by this website - the 19th century through the middle of the 20th century. One prominent observer noted that "...bottles made for foods are quite numerous and, in fact, constitute a large portion of bottles made..." (Munsey 1970). This is likely true in regards to the numbers of items produced which if included with medicinal bottles (previous category) would likely make up the majority of bottles produced since the early 19th century. In general, food bottles have not inspired as much interest from collectors (the source of the majority of bottle reference books) as other categories; thus, foods have received a relatively limited amount of research in comparison to the noted commonness of the type. The one very significant exception to this would be the fruit/canning jar category which has generated high interest over the years. Some of the basic food bottle shapes continued in production well into the late 20th century (particularly fruit jars), though most did not. Similar to the medicinal products covered above, food products are largely contained in plastic containers of all sorts in recent decades though there are various glass bottles and jars in use today that do exhibit some of their historical heritage. Because of the wide diversity of shapes used in the past, the Food Bottles & Canning jars Bottle typing webpage (linked below) is relatively large. As with all historic bottle types and shapes, there is a wide variation of subtle differences to be found within the various diagnostic shape classes which are covered in this section; thus, don't dwell to closely on minor nuances. From this point a user needs to either scan the thumbnail images below to find the food bottle or fruit/canning type they are interested in or click Bottle Typing/Diagnostic Shapes: Food Bottles & Canning Jars to move to that page which specifically covers the various types of food and food related bottles/jars commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the major form classes or categories of these bottles as follows (these are divided further a bit on the Food Bottles & Canning Jars page):
*Note: Some authors classify milk bottles within the "beverage" category and not as a "food" bottle. This website does not use a specific "beverage bottle" category, but instead divides what would be sub-classes under beverages (liquor, beer, soda, etc.) into their own specific types due to the breadth of variety and examples within those categories. Given this structure, milk bottles could either be a separate category, or being widely considered as a food (and surely as a base for other food products like cheese), included within the food bottle group...which is what has been done. This very large category and webpage will most likely need divided further in the future. More specifically, the canning/fruit jars section and possibly milk bottles may be made into their own separate webpages. The following thumbnail images of different food bottles & canning jars may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Food Bottles & Canning Jars. As noted earlier, be aware that the diversity of shape, size, and color of food bottles and canning jars is very extensive and those pictured below are but a sampling of that variety, though does represent commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Food Bottles & Canning Jars page are covered in the order that the bottles are pictured below. Click
to move to the
Bottle Typing/Diagnostic Shapes:
Food Bottles & Canning Jars page. |
Return to the top of this page.
Household bottles (non-food related) This non-food related Household bottles page is one of two typology pages (in addition to the Miscellaneous & Foreign bottles page which follows) which comprise the "catch-all" sections for bottle types not otherwise covered by the other major bottle type categories. Specifically, this page addresses non-food products clearly used in households across the United States and Canada. These products were also used, of course, by businesses, schools, government offices, and other non-household entities. The "household bottles" (aka "personal" bottle) category has been used by archaeologists - and collectors to some degree - for many years although the actual bottle types contained within the category varies significantly (Berge 1980; Univ. of Utah [IMACS] 1992; Felton et al. 1984; Jones & Sullivan 1989). For example, canning/fruit jars which are included by some authors in the "household" bottles category, are covered within this website on the Food Bottles & Canning Jars page (Berge 1980). Another example is that chemical and poison type bottles - which could have been covered on this page or the "Miscellaneous bottles" page - were instead discussed on the Medicinal/Chemical/Druggist bottles typology page (Univ. of Utah [IMACS] 1992). There has never been total agreement on the categorization hierarchy of bottle types and probably never will be. The point behind these typology pages is not to establish a hierarchal classification system for bottle types but instead to help users identify what the most likely function or use was made of the specific bottle shape or type they are interested in determining such for. See the "Organization & Structure" section which follows below for the specific bottle types that this website includes in the "household" category. From this point a user needs to either scan the thumbnail images below to find the household bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Household Bottles (non-food related) to move to that page which specifically covers the various types of household bottles (non-food related) commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers the major form classes or categories of these bottles as follows (these are divided further on the Household Bottles [non-food related] page):
The following thumbnail images of different household bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Household Bottles (non-food related). As noted earlier, be aware that the diversity of shape, size, and color of the various categories of "household" bottles is very extensive and those pictured below are but a sampling of that variety, though does represent commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Household Bottles (non-food related) page are covered in the order that the bottles are pictured below. Click
to move to the
Bottle Typing/Diagnostic Shapes:
Household Bottles (non-food related) page. |
Return to the top of this page.
Miscellaneous & Foreign Bottles This and the previous "Household bottles (non-food)" pages are the catch-all sections for American-made bottles that do not neatly fit in any of the other major typology pages. This particular page also includes a smattering of foreign bottles which were commonly imported into the U. S. and Canada and likely to be found on U. S. and Canadian historic sites. From this point a user needs to either scan the thumbnail images below to find the miscellaneous bottle type they are interested in or click Bottle Typing/Diagnostic Shapes: Miscellaneous & Foreign Bottles to move to that page which specifically covers the various types of bottles that both do not fit in any of the other typology section and were commonly produced and used during the era covered by this website - the 19th century through mid 20th century. This page covers a few of the major form classes or categories of these bottles as follows; these are divided further on the Miscellaneous & Foreign Bottles page. Be aware that this section is very cursory as the number of "miscellaneous" and, in particular foreign, bottles is virtually limitless a beyond the scope of this website (which is already complex enough): The following thumbnail images of different miscellaneous bottles may be clicked to view a larger version of that picture. Search through these images to find the bottle type or shape that you are interested in - or one that is close. A separate webpage containing information about - and additional pictures of - each of these bottles is found at this link: Bottle Typing/Diagnostic Shapes: Miscellaneous & Foreign Bottles. As noted earlier, be aware that the diversity of shape, size, and color of the various categories of the bottles covered in this section is very extensive and those pictured below are but a sampling of that variety, though does represent commonly encountered types and shapes. The bottles on the Bottle Typing/Diagnostic Shapes: Miscellaneous & Foreign Bottles page are covered in the order that the bottles are pictured below. Click to move to the Bottle Typing/Diagnostic Shapes: Miscellaneous & Foreign Bottles page.
|
Return to the top of this page.
Attached to this complex of "typing" pages is a separate webpage that is an extensive pictorial coverage of bottles of all types with their original product content labeling. The Labeled Bottles page allows users to see what many different shapes or "types" of bottles were precisely used for as the original labels (and often contents) are still intact. It is hoped that showing a large assortment of bottles, which are often not embossed as to contents, will give users more of a feel for what shapes were used primarily for what products. This page is is almost purely a pictorial page with limited descriptive information on the pictured bottles; the labels usually speak for themselves. Most of the bottles that are pictured are not pictured elsewhere on this website, and in fact, are often images found on the internet or submitted by users. This page is also divided into the eight major bottle type categories noted on this page: Liquor & Spirits; Wine & Champagne; Beer & Ale; Soda & Mineral Water; Medicinal/Chemical/Druggist; Food & Fruit/Canning Jars; Household (non-food related); and Miscellaneous. It is expected that additional images of product labeled bottles will be constantly acquired and added indefinitely to this page well into the future. Stay tuned...Click Labeled Bottles to view the page. Note: Submissions for addition to the Labeled Bottles page in the form of clear, good quality digital images are most welcome! Of particular need are good images for the categories that are relatively underrepresented. If submitting photos, views of the label(s), embossing (if present), at least one side (if not round), and the base would be appreciated though just a picture of the entire bottle showing the label clearly are also acceptable.
If you would like to contribute to this webpage please
contact the author of this website at:
|
SEARCHING THIS WEBSITE:
To do a word/phrase
or image search of this website
one must use the following Google search link:
Search the SHA/BLM Historic Glass Bottle Identification & Information
Website
(Note: Search results for this website will be just below the
final top-of-the-page Google paid ads.)
1/1/2024
Return to the top of this page.
This website created and managed by:
Bill Lindsey
Bureau of Land Management (retired) -
Klamath Falls, Oregon
Questions? See
FAQ #21.
Copyright © 2024 Bill Lindsey. All rights reserved. Viewers are encouraged, for personal or classroom use, to download limited copies of posted material. No material may be copied for commercial purposes. Author reserves the right to update this information as appropriate.